The Strike Industries AR Overmolded Ultimate Dust Cover for .223/5.56 is the next iteration of their Ultimate Dust Cover (UDC). The upgraded UDC design with double injection mold and overmolded rubberized soft sealing lip for better seal to prevent debris and water from entering when the cover is closed. The SI patent pending “True Seal” internal lip seals the port tighter than traditional dust cover designs. The AR Overmolded UDC comes pre-assembled with all the parts needed for a quick tool-less installation and easy disassembly using something as common as a pen or small point. Built into the UDC is an adjustable detent set screw to compensate for wear on the upper receiver. The SI patent pending noise-reduction rubber padding also makes it nearly 100% silent during activation. Made of overmolded high-strength impact resistant custom blended SI Polymer Extreme material, the SI AR Overmolded UDC does not deform or get bent out of shape. Resistant to rust unlike traditional steel covers, if the time ever comes, knowing you can remove and quickly reinstall makes this an easy cost-effective choice. Consider the Strike Industries AR Overmolded Ultimate Dust Cover for .223/5.56 on a new build or when you are going to untorque the barrel nut as this is the easiest time to remove your old stamped steel dust cover to upgrade. Install AND remove any SI UDC in just 5 to 10 seconds. Specifications for Strike Industries AR Overmolded Ultimate Dust Cover for .223/5.56: Manufacturer: Strike Industries Gun Model: AR-15 Fabric/Material: SI Polmer Extreme Features of Strike Industries AR Overmolded Ultimate Dust Cover for .223/5.56 Upgraded UDC design with double injection mold and overmolded rubberized seal Quick toolless installation and easy disassembly using something as common as a pen Patent pending “True Seal” internal lip seals the port tighter than traditional dust cover designs Overmolded soft sealing lip for better seal to prevent debris and water from entering when cover is closed Builtin adjustable detent set screw to compensate for wear on upper receiver Patent pending noisereduction rubber padding makes it nearly 100% silent during activation Made of overmolded highstrength SI Polymer Extreme material to not deform or get bent out of shape Resistant to rust unlike traditional steel covers Install AND remove the Overmolded Ultimate Dust Cover in just 5 to 10 seconds Package Contents: Strike Industries AR Overmolded Ultimate Dust Cover for .223/5.56 x1 AR Overmolded Dust Cover x4 Rubber pads
6 reviews for Strike Industries AR Overmolded Ultimate Dust Cover for .223/5.56
Only logged in customers who have purchased this product may leave a review.
Red Dog –
I wanted to go with a composite dust cover on my latest AR build. In the past I always went with an aluminum dust cover and they really get beat up. I really like the way it mates up to the receiver the gasket does a very good job sealing.
Chuck –
What a great idea to simplify changing a dust cover , fit nicely on a LWRCI IC A5 5.56 looks way better than the factory cover . I watched many videos on removing a dust cover by sliding the cover axle towards the forward assist and this is not recommended by LWRCI. remove one of the roll pins to remove the cover and reinstall the roll pin and the SI overmolded cover is an easy install
Lt.Dan –
I own several Strike products and decided to try out their quick and easy to install design. I have to say, I love the ease of installing and removing dust covers now. It took longer to remove the old cover that came with my AR. Just keep in mind that this model is made of a polymer, Im not a fan of the material difference so I will be upgrading to their billet line in the near future. Again, I just wanted to try it out but I would definitely recommend it to those looking for an affordable upgrade to their standard dust cover. For those wondering, both lines (billet & polymer) have the noise reduction when deployed.
Ramon Rodriguez Ramon Rodriguez –
It fits and does what it should makes its worse i shoulda got the metal one or billet but the adjustabke bead does not hold its the retaining screw that ks holding it an its maring and ruining my reciever my fault but so sad
Mike –
The dust cover did not work. First, it came with the spring wound improperly and after that was corrected, it still rubbed so badly on the receiver it would not open all the way. It also did not completely close or latch properly.
HBaron –
I have replaced all my AR's dust covers with several varieties of Strike Industries products and they all look amazing and work 100%. I like this model the best as its best bang for the buck. The billet version is nice too but since you cant tell the difference between it and this plastic one, I don't buy those anymore due to price. I think alot of people have problems installing these properly and give it a bad review because it takes a very special size screwdriver to properly adjust the ball bearing. When I first got these I almost gave up because they would never stay closed but once I learned how to adjust the bearing with a perfect size screwdriver, they now close perfectly and just look killer compared to the stock ugly dust covers found on most AR's. I think these are must have accessories to replace on all AR builds!